changes to draft 1 of the 1999 LRM

From: Joseph Skudlarek (jskud@analogy.com)
Date: Wed Aug 12 1998 - 12:56:07 PDT


BAD MSG:
Per Maq's remarks at the last meeting, I've split up my updates, and am
ending them to each task force. Here's what I have for the behavioral
task force. Questions to me. /Jskud
Content-Length: 2090
X-Lines: 64
X-Status: $$$$
X-UID: 0000000606
Status: RO

       -*- Mode: indented-text; tab-width: 8 fill-column: 72 -*-
            LIVE DOCUMENT: </homes/jskud/1364/behav_submit>
           LAST UPDATED: <08/12/98 12:55:36 Joseph Skudlarek>

<p> Proposed Changes For
                               IEEE 1364
                         LRM Draft 1 of 29Jun98
                         Behavioral Task Force

<p>=======================================================================
Purpose
=======================================================================

        Propose changes to draft 1 of LRM.

<p>=======================================================================
Do All Nets Model Strength?
=======================================================================

        [NB: submitted to both ASIC and Behavioral Task Forces, since
        impacts both section 3 and 7.]

    question

        Do all nets model strength? There are suggestions that they
        don't; eg, page 17 section 3.7.1 --

            Logical conflicts from multiple sources on a wire or a tri
            net result in unknown values unless the net is controlled by
            logic strength.

    proposal

        clarify LRM as appropriate, based on discussion

<p>=======================================================================
Detailed Edits
=======================================================================

page 17 section 3.7.1 -- replace

        Logical conflicts from multiple sources on a wire or a tri net
        result in unknown values unless the net is controlled by logic
        strength.

with

        Logical conflicts from multiple sources of the same strength on
        a wire or a tri net result in x (unknown) values.

page 22 section 3.7.4 -- add after 1st paragraph

        A tri0 net is equivalent to a wire net with a continuous 0 value
        of pull strength driving it. A tri1 net is equivalent to a wire
        net with a continuous 1 value of pull strength driving it.

<p>=======================================================================
[]
=======================================================================



This archive was generated by hypermail 2.1.4 : Mon Jul 08 2002 - 12:52:59 PDT and
sponsored by Boyd Technology, Inc.