RE: Configs Intent - was: potential command line option

From: Brophy, Dennis (dennisb@model.com)
Date: Wed Apr 20 2005 - 23:16:53 PDT

  • Next message: Pragmatic C Software: "Re: FW: New Mantis Issue #667 for V-1364"

    Cliff,

    If you read http://www.boyd.com/1364_btf/report/full_pr/350.html, you
    will have a good historical review on the config discussion, which
    appears to have started to be replayed again. And, I stand by my
    comments in May 2004 that restrictions on the placement of configs as
    being suggested is a regression from the 1364-2001 spec and does not
    serve the user. But I would support whatever cleanup is desired for
    semicolons.

    -Dennis

    -----Original Message-----
    From: owner-etf@boyd.com [mailto:owner-etf@boyd.com] On Behalf Of
    Clifford E. Cummings
    Sent: Wednesday, April 20, 2005 10:55 PM
    To: btf@boyd.com; etf@boyd.com; sv-bc@eda.org; sv-ec@eda.org
    Subject: Re: Configs Intent - was: potential command line option

    Hi, Brad -

    Was this discussed and approved in committee meetings? (I missed a large
    number of meetings and could have missed this discussion).

    I would prefer required semicolons as originally intended and just fix
    all my errors in the config section as previously noted.

    Regards - Cliff

    At 08:58 PM 4/20/2005, Brad Pierce wrote:
    >In SystemVerilog these semicolons are optional.
    >
    > http://www.eda.org/sv/Changes_draft6/LRM_Changes_A_BNF.html
    >
    >-- Brad
    >
    >-----Original Message-----
    >From: owner-btf@boyd.com [mailto:owner-btf@boyd.com]On Behalf Of
    >Shalom.Bresticker@freescale.com
    >Sent: Wednesday, April 20, 2005 8:22 PM
    >To: Clifford E. Cummings
    >Cc: btf@boyd.com; etf@boyd.com; sv-bc@eda.org; sv-ec@eda.org
    >Subject: Re: Configs Intent - was: potential command line option
    >
    >
    >Regarding the semicolons at the end of the statements, there is already

    >an ETF issue on this. In fact, I think there are two. I think there is
    >one issue (# 372 ?), which lists this as one of several config issues,
    >and I think there is another one ( 5xx ? 501 ?) which is dedicated to
    >this issue.
    >
    >Shalom

    ----------------------------------------------------
    Cliff Cummings - Sunburst Design, Inc.
    14314 SW Allen Blvd., PMB 501, Beaverton, OR 97005
    Phone: 503-641-8446 / FAX: 503-641-8486
    cliffc@sunburst-design.com / www.sunburst-design.com Expert Verilog,
    SystemVerilog, Synthesis and Verification Training

    This archive was generated by hypermail 2.1.4 : Wed Apr 20 2005 - 22:53:45 PDT and
    sponsored by Boyd Technology, Inc.