RE: 1364 Minutes - Mantis 680 Resolved

From: Fitzpatrick, Tom (tom_fitzpatrick@mentor.com)
Date: Tue May 10 2005 - 13:31:39 PDT

  • Next message: Adam Krolnik: "Re: 1364 Minutes - Mantis 680 Resolved"

    Hi Everyone,
     
    The latest (and last) proposal, Configs_v6.pdf, is now on the Mantis
    page. Please take a look prior to the Champions' meeting on Wednesday.
     
    Thanks,
    -Fitz
     
    Tom Fitzpatrick W:(978)448-8797
    tfitz@model.com <mailto:tfitz@model.com> C: (978)337-7641
     

    ________________________________

            From: Fitzpatrick, Tom
            Sent: Tuesday, May 10, 2005 3:17 PM
            To: btf@boyd.com; etf@boyd.com; 'sv-cc@eda.org';
    'sv-champions@eda.org'
            Subject: 1364 Minutes - Mantis 680 Resolved
            
            
            Hi Gang,
             
            Wooo-Hoooo, we're done!
             
            As you'll see in the attached minutes, we approved a proposal
    for the Configs issue (Mantis 680). Cliff has updated the proposal, and
    will post it on Mantis shortly, pending initial review by Steve and
    Brad.
             
            As stated in the minutes, the motion was approved unanimously
    (with a non-voting abstention from Alec). As soon as the final proposal
    is up on Mantis, I will change the status of 680 to "resolved" so it can
    be ratified at tomorrow's (Wednesday) Champions' meeting. So, I urge
    everyone interested in this to review the proposal and bring up any
    remaining serious issues at that time.
             
            Thanks again to everyone for hanging in there and resolving this
    issue (and all the others too).
            -Fitz
             
            Tom Fitzpatrick
            Verification Technologist
            Mentor Graphics Corporation
            tfitz@model.com <mailto:tfitz@model.com>
            W: (978)448-8797
            C: (978)337-7641
             
             

    This archive was generated by hypermail 2.1.4 : Tue May 10 2005 - 13:07:11 PDT and
    sponsored by Boyd Technology, Inc.