errata/522: Re: errata/522: Re: errata/522: A.2.2.3: delay2 and delay3 should be constant expressions

From: Stephen Williams (steve@icarus.com)
Date: Mon Jan 05 2004 - 20:20:00 PST

  • Next message: Shalom.Bresticker@motorola.com: "errata/522: Re: errata/522: A.2.2.3: delay2 and delay3 should be constant expressions"

    The following reply was made to PR errata/522; it has been noted by GNATS.

    From: Stephen Williams <steve@icarus.com>
    To: etf-bugs@boyd.com
    Cc:
    Subject: Re: errata/522: Re: errata/522: A.2.2.3: delay2 and delay3 should
     be constant expressions
    Date: Mon, 05 Jan 2004 20:31:22 -0800

     Steven Sharp wrote:
    > The following reply was made to PR errata/522; it has been noted by GNATS.
    >
    > From: Steven Sharp <sharp@cadence.com>
    > To: etf-bugs@boyd.com, Shalom.Bresticker@motorola.com
    > Cc:
    > Subject: Re: errata/522: A.2.2.3: delay2 and delay3 should be constant expressions
    > Date: Mon, 5 Jan 2004 16:54:25 -0500 (EST)
    >
    > Just for reference, neither Verilog-XL nor NC-Verilog require these delays
    > to be constant expressions.
    >
    > Steven Sharp
    > sharp@cadence.com
     
     ... And I've seen bug reports in the real world that suggest that
     people actually do change gate delays at run time.
     
     --
     Steve Williams "The woods are lovely, dark and deep.
     steve at icarus.com But I have promises to keep,
     http://www.icarus.com and lines to code before I sleep,
     http://www.picturel.com And lines to code before I sleep."
     

    This archive was generated by hypermail 2.1.4 : Mon Jan 05 2004 - 20:20:04 PST and
    sponsored by Boyd Technology, Inc.