RE: [P1800] Updated Database

From: Shalom.Bresticker@freescale.com
Date: Thu Jan 06 2005 - 11:28:47 PST

  • Next message: Karen Pieper: "Minutes of the 1/10/04 ETF Meeting"

    Stu,

    When you say strikeouts and change-bars, what are you referring to?
    That is, relative to what earlier version?
    I was not planning on strikeouts in 1364,
    and the change bars are relative to 1364-2001.

    Also, I'm not clear about whether the ballot drafts have to be without
    change bars. I don't remember.

    Thanks,
    Shalom

    On Thu, 6 Jan 2005, Stuart Sutherland wrote:

    > All,
    >
    > Just to make sure the schedule is clear, the next drafts of the 1364 and
    > P1800 LRMs are due to be completed Jan 13. These drafts are the pre-ballot
    > review drafts. They are to contain all corrections and additions that have
    > approved for the proposed 2005 standards. The only changes after these
    > drafts should be to correct any editing problems. These review drafts will
    > contain strike-through text and change bars to help with the review of the
    > editing work.
    >
    > The Jan 13 pre-ballot review drafts will first go to the 1364 and 1800
    > chairs to be approved for distribution. The chairs have a few days to make
    > that approval, but hopefully won't need all of that window. The chairs will
    > then post the drafts on some form of restricted web site, so that only
    > committee members can access the drafts.
    >
    > The actual ballot drafts are due early February (the 1364 and 1800 standards
    > are going to ballot at the same time, on parallel schedules). Those drafts
    > will have all strike-through text and change bars removed, and corrections
    > to any editing errors that were found.
    >
    > THERE IS VERY LITTLE TIME BETWEEN THE PRE-BALLOT REVIEW DRAFTS AND THE FINAL
    > BALLOT DRAFTS! Therefore, it is important that the subcommittees be
    > organized and ready to quickly review all the editing that will have been
    > made in the Jan 13 drafts. Any problems with editing that are found needs
    > to be documented ASAP, to allow time to make those corrections in the final
    > ballot drafts.
    >
    > Stu
    > ~~~~~~~~~~~~~~~~~~~~~~~~~
    > Stuart Sutherland
    > stuart@sutherland-hdl.com
    > +1-503-692-0898 

    -- 
Shalom Bresticker                        Shalom.Bresticker @freescale.com
Design & Verification Methodology                    Tel: +972 9  9522268
Freescale Semiconductor Israel, Ltd.                 Fax: +972 9  9522890
POB 2208, Herzlia 46120, ISRAEL                     Cell: +972 50 5441478
  
[ ]Freescale Internal Use Only      [ ]Freescale Confidential Proprietary

    This archive was generated by hypermail 2.1.4 : Thu Jan 06 2005 - 11:14:06 PST and
    sponsored by Boyd Technology, Inc.