errata/653: 2005D6, A.7.4: edge_sensitive_path_declaration should be in A.7.2

From: Shalom Bresticker (Shalom.Bresticker@freescale.com)
Date: Thu Mar 03 2005 - 00:10:01 PST

  • Next message: Shalom.Bresticker@freescale.com: "errata/654: 14.2.3: specify block edge-sensitive path description with polarity"

    >Number: 653
    >Category: errata
    >Originator: Shalom Bresticker <Shalom.Bresticker@freescale.com>
    >Description:

    In P1364-2005 Draft 6, in A.7,

    A.7.2 is Specify path declarations
    A.7.4 is Specify path delays

    In A.7.4, the definitions of edge_sensitive_path_declaration till the end of
    A.7.4 (polarity_operator)
    should be in A.7.2 rather than A.7.4. 

    --
Shalom Bresticker                        Shalom.Bresticker @freescale.com
Design & Verification Methodology                    Tel: +972 9  9522268
Freescale Semiconductor Israel, Ltd.                 Fax: +972 9  9522890
POB 2208, Herzlia 46120, ISRAEL                     Cell: +972 50 5441478

    [ ]Freescale Internal Use Only      [ ]Freescale Confidential Proprietary

    This archive was generated by hypermail 2.1.4 : Thu Mar 03 2005 - 00:10:21 PST and
    sponsored by Boyd Technology, Inc.