errata/341: Re: errata/341: Re: errata/341: PROPOSAL - How are two dimensional arrays of regsto be treated in VPI?

From: Shalom Bresticker (Shalom.Bresticker@motorola.com)
Date: Mon Feb 02 2004 - 07:30:00 PST

  • Next message: Charles Dawson: "errata/341: Re: errata/341: Re: errata/341: Re: errata/341: PROPOSAL - How are two dimensional arrays of regsto be treated in VPI?"

    The following reply was made to PR errata/341; it has been noted by GNATS.

    From: Shalom Bresticker <Shalom.Bresticker@motorola.com>
    To: Charles Dawson <chas@cadence.com>
    Cc: ptf-bugs@boyd.com
    Subject: Re: errata/341: Re: errata/341: PROPOSAL - How are two dimensional
     arrays of regsto be treated in VPI?
    Date: Mon, 02 Feb 2004 17:36:45 +0200

     Sorry, my question was not clear.
     
     In the diagram in 26.6.1, on the right hand side, there is an enclosure "reg
     array" between
     "reg" and "variables". If you change "memory" to "reg array", then there will be
     two enclosures
     named "reg array". Is that what you want? If not, then what about the vpiMemory
     label that
     you want to add?
     
     Thanks,
     Shalom
     
    > >> Make the following changes to section 26.6.1:
    > >>
    > >> - Change the reference enclosure "memory" to "reg array"
    > >
    > >
    > > There is already such an enclosure ?
    >
    > Yes, it is on the right hand side of the diagram between variables
    > and named event.
     
     --
     Shalom Bresticker Shalom.Bresticker@motorola.com
     Design & Reuse Methodology Tel: +972 9 9522268
     Motorola Semiconductor Israel, Ltd. Fax: +972 9 9522890
     POB 2208, Herzlia 46120, ISRAEL Cell: +972 50 441478
     
     
     

    This archive was generated by hypermail 2.1.4 : Mon Feb 02 2004 - 07:30:04 PST and
    sponsored by Boyd Technology, Inc.